tk88 trang truy cập nhà cái

Product description



　　Oscilloscope Mode (Vertical)

　　Frequency Response - DC Coupled

　　Without probes and test leads (with BB120): DC to 40 MHz (-3 dB)

　　With STL120-IV 1:1 shielded test leads: DC to 12.5 MHz (-3 dB), DC to 20 MHz (-6 dB)

　　With VP41 10:1 probe: DC to 40 MHz (-3 dB)

　　Frequency Response - AC Coupled (LF Roll Off)

　　Without probes and test leads: <10 Hz (-3 dB)

　　With STL120-IV 1:1 shielded test leads: <10 Hz (-3 dB)

　　With VP41 10:1 probe: <10 Hz (-3 dB)

　　Rise Time, Excluding Probes, Test Leads

　　<8.75 ns

　　Input Impedance

　　Without probes and test leads: 1 MΩ/20 pF

　　With BB120: 1 MΩ/24 pF

　　With STL120-IV 1:1 shielded test leads: 1 MΩ/230 pF

　　With VP41 10:1 probe: 5 MΩ/15.5 pF

　　Sensitivity

　　5 mV to 200 V/div

　　Analog Bandwidth Limiter

　　10 kHz

　　Display Modes

　　A, -A, B, -B

　　Maximum Input Voltage A and B

　　Direct, with test leads, or with VP41 probe: 600 Vrms CAT IV, 750 Vrms maximum voltage

　　With BB120: 600 Vrms

　　Maximum Floating Voltage, from any Terminal to Ground

　　600 Vrms CAT IV, 750 Vrms up to 400 Hz

　　Oscilloscope Mode (Horizontal)

　　Scope Modes

　　Normal, single, roll

　　Ranges (Normal)

　　Equivalent sampling: 10 ns to 500 ns/div

　　Real time sampling: 1 μs to 5 s/div

　　Single (real time): 1 μs to 5 s/div

　　Roll (real time): 1 s to 60 s/div

　　Sampling Rate (for Both Channels Simultaneously)

　　Equivalent sampling (repetitive signals): up to 4 GS/s

　　Real time sampling 1 μs to 60 s/div: 40 MS/s

　　Trigger

　　Screen Update

　　Free run, on trigger

　　Source

　　A, B

　　Sensitivity A and B

　　At DC to 5 MHz: 0.5 divisions or 5 mV

　　At 40 MHz: 1.5 divisions

　　At 60 MHz: 4 divisions

　　Slope

　　Positive, negative

　　Advanced Scope Functions

　　Display Modes

　　Normal: Captures up to 25 ns glitches and displays analog-like persistence waveform

　　Smooth: Suppresses noise from a waveform

　　Glitch off: Does not capture glitches between samples

　　Envelope: Records and displays the minimum and maximum of waveforms over time

　　Auto Set (Connect-and-View)

　　Continuous fully automatic adjustments of amplitude, time base, trigger levels, trigger gap, and hold-off. Manual override by user adjustment of amplitude, time base, or trigger level

　　Input A and B

　　DC Voltage (V DC)

　　Ranges: 500 mV, 5, 50, 500, 750 V

　　Accuracy: ±(0.5% +5 counts)

　　Common mode rejection (CMRR): >100 dB at DC, >60 dB at 50, 60, or 400 Hz

　　Full scale reading: 5000 counts

　　True RMS Voltages (V AC and V AC+DC)

　　Ranges: 500 mV, 5, 50, 500, 750 V

　　Accuracy for 5 to 100% of range (DC coupled)

　　DC to 60 Hz (V AC + DC): ±(1% +10 counts)

　　1 to 60 Hz (V AC): ±(1% +10 counts)

　　Accuracy for 5 to 100% of range (AC or DC coupled): 60 Hz to 20 kHz: ±(2.5% +15 counts)

　　DC rejection (only V AC): >50 dB

　　Common mode rejection (CMRR): >100 dB at DC; >60 dB at 50, 60, or 400 Hz

　　Full scale reading: 5000 counts, reading is independent of any signal crest factor

　　Peak

　　Modes: Maximum peak, minimum peak, peak-to-peak

　　Ranges: 500 mV, 5, 50, 500, 2200 V

　　Accuracy: Maximum peak or minimum peak: 5% of full scale; peak-to-peak: 10% of full scale

　　Full scale reading: 500 counts

　　Frequency

　　Ranges: 1, 10, 100 Hz, 1, 10, 100 kHz, 1, 10, and 70 MHz

　　Frequency range: 15 Hz (1 Hz) to 50 MHz in continuous autoset

　　Accuracy at 1 Hz to 1 MHz: ±(0.5% +2 counts)

　　Full scale reading: 10,000 counts

　　RPM

　　Maximum reading: 50 kRPM

　　Accuracy: ±(0.5% +2 counts)

　　Duty Cycle

　　Range: 2 to 98%

　　Frequency range: 15 Hz (1 Hz) to 30 MHz in continuous autoset

　　Pulse Width

　　Frequency range: 15 Hz (1 Hz) to 30 MHz in continuous autoset

　　Full scale reading: 1000 counts

　　Amperes

　　With current clamp

　　Ranges: same as V DC, V AC, V AC+DC, or peak

　　Scale factors: 0.1, 1, 10, 100, 400 mV/A, 1 V/A, 10 mV/mA

　　Accuracy: same as V DC, V AC, V AC+DC, or peak (add current clamp uncertainty)

　　Decibel

　　0 dBV: 1 V

　　0 dBm (600/50 Ω): 1 mW referenced to 600 or 50 Ω

　　dB on V DC, V AC, or V AC+DC

　　Full scale reading; 1000 counts

　　Crest Factor

　　Range: 1 to 10

　　Full scale reading: 90 counts

　　Phase

　　Modes: A to B, B to A

　　Range: 0 to 359°

　　Resolution: 1°

　　Power

　　Configurations: 1 phase/3 phase 3 conductor balanced loads (3 phase: fundamental component only, AUTOSET mode only)

　　Power factor (PF): Ratio between watts and VA range - 0.00 to 1.00

　　Watt: RMS reading of multiplying corresponding samples of input A (volts) and input B (amperes); Full scale reading: 999 counts

　　VA: Vrms x Arms; Full scale reading: 999 counts

　　VA reactive (var): √((VA)2-W2); Full scale reading: 999 counts

　　Vpwm

　　Purpose: To measure on pulse width modulated signals, like motor drive inverter outputs

　　Principle: Readings show the effective voltage based on the average value of samples over a whole number of periods of the fundamental frequency

　　Accuracy: As Vrms for sine wave signals

　　Input A to Common

　　Ohm

　　Ranges: 50, 500 Ω, 5, 50, 500 kΩ, 5, 30 MΩ

　　Accuracy: ±(0.6% +5 counts) 50 Ω ±(2% +20 counts)

　　Full scale reading: 50 Ω to 5 MΩ - 5000 counts; 30 MΩ - 3000 counts

　　Measurement current: 0.5 mA to 50 nA, decreases with increasing ranges

　　Open circuit voltage: <4 V

　　Common Continuity (Cont)

　　Beep: <(30 Ω ±5 Ω) in 50 Ω range

　　Measurement current: 0.5 mA

　　Detection of shorts of: ≥1 ms

　　Common Diode

　　Measurement voltage: At 0.5 mA: >2.8 V

　　At open circuit: <4 V

　　Measurement current: 0.5 mA

　　Polarity: + on input A, - on COM

　　Capacitance (CAP)

　　Ranges: 50, 500 nF, 5, 50, 500 μF

　　Full scale reading: 5000 counts

　　Measurement current: 500 nA to 0.5 mA, increases with increasing ranges

　　Advanced Meter Functions

　　Zero Set

　　Set actual value to reference

　　AutoHold (on A)

　　Captures and freezes a stable measurement result. Beeps when stable. AutoHold works on the main meter reading, with thresholds of 1 Vpp for AC signals and 100 mV for DC signals

　　Fixed Decimal Point

　　Activated by using attenuation keys

　　Cursor Readout

　　Sources

　　A, B

　　Single Vertical Line

　　Average, minimum and maximum readout

　　Average, minimum, maximum and time from start of readout (in ROLL mode; instrument in HOLD)

　　Minimum, maximum and time from start of readout (in RECORDER mode; instrument in HOLD)

　　Harmonics values in POWER QUALITY mode

　　Dual Vertical Lines

　　Peak-peak, time distance and reciprocal time distance readout

　　Average, minimum, maximum and time distance readout (in ROLL mode; instrument in HOLD)

　　Dual Horizontal Lines

　　High, low and peak-peak readout

　　Rise or Fall Time

　　Transition time, 0%-level and 100%-level readout (manual or auto leveling; auto leveling only possible in single channel mode)

　　Accuracy

　　As oscilloscope accuracy

　　Recorder

　　Meter Readings

　　Measurement speed: Maximum 2 measurements

　　Record size (minimum, maximum, average): 2 M readings for 1 channel

　　Recorded time span: 2 weeks

　　Maximum number of events: 1024

　　Waveform Record

　　Maximum sample rate: 400 K samples

　　Size internal memory: 400 M samples recorded time

　　Span internal memory: 15 minutes at 500 μs/div - 11 hours at 20 ms/div

　　Record size SD card: 1.5 G samples

　　Recorded time span SD card: 11 hours at 500 μs/div - 14 days at 20 ms/div

　　Maximum number of events: 64

　　Power Quality

　　Readings

　　Watt, VA, var, PF, DPF, Hz

　　Watt, VA, Var Ranges (Auto)

　　250 W to 250 MW, 625 MW, 1.56 GW

　　When selected: total (%r) ±(2% + 6 counts)

　　When selected: fundamental (%f) ±(4% + 4 counts)

　　DPF

　　0.00 to 1.00

　　PF

　　0 to 1, ±0.04

　　Frequency Range

　　10 Hz to 15 kHz

　　40 to 70 Hz

　　Number of Harmonics

　　DC to 51

　　Readings/Cursor Readings

　　(Fundamental 40 to 70 Hz)

　　Vrms/Arms /Watt

　　Each harmonic from fundamental maybe selected for individual readings

　　Bus Health Tester

　　AS-i

　　Subtype: NEN-EN50295

　　CAN

　　Subtype: ISO-11898

　　Interbus S

　　Subtype: RS-422

　　Protocol: EIA-422

　　Modbus

　　Subtype: RS-232; Protocol: RS-232/EIA-232

　　Subtype: RS-485; Protocol: RS-485/EIA-485

　　Foundation Fieldbus

　　Subtype: H1

　　Protocol: 61158 type 1, 31.25 kBit

　　Profibus

　　Subtype: DP; Protocol: EIA-485

　　Subtype: PA; Protocol: 61158 type 1

　　RS-232

　　Subtype: EIA-232

　　RS-485

　　Subtype: EIA-485

　　General Specifications

　　Waveform Display

　　Vertical: 10 div of 40 pixels

　　Horizontal: 12 div of 40 pixels

　　Maximum Input Voltage A and B

　　Direct on input or with leads: 600 Vrms CAT IV for derating

　　With banana-to BNC adapter BB120: 600 Vrms for derating

　　Maximum floating voltage from any terminal to ground: 600 Vrms CAT IV, 750 Vrms up to 400 Hz

　　Display

　　Type: 5.7" color active martrix TFT

　　Resolution: 640 x 480

　　Interface

　　Optically isolated: Transfer screen copies (bitmaps), settings and data

　　USB to PC/laptop: OC4USB optically isolated USB adapter/cable, (optional), using FlukeView® software for Windows®

　　Wireless Radio with Adapter

　　Frequency range: 2412 to 2462 MHz

　　Output power: <100 mW

　　Environmental

　　MIL-PRF-28800F, Class 2

　　Temperature

　　Battery operation: 32 to 104°F (0 to 40°C)

　　Power adapter operation: 32 to 122°F (0 to 50°C)

　　Storage: -4 to 140°F (-20 to 60°C) non-condensing

　　Humidity (Operating)

　　At 32 to 50°F (0 to 10°C): non-condensing

　　At 50 to 86°F (10 to 30°C): 95%

　　At 86 to 104°F (30 to 40°C): 75%

　　At 104 to 122°F (40 to 50°C): 45%

　　Altitude

　　Operating at 10,000' (3 km): CAT III 600 V

　　Operating at 6600' (2 km): CAT IV 600 V

　　Storage: 40,000' (12 km)

　　EMC Electromagnetic Compatibility

　　USA (FCC): 47 CFR 15 subpart B (this product is considered an exempt device per clause 15.103)

　　Enclosure Protection

　　IP51, ref: EN/IEC60529

　　Safety

　　General: IEC 61010-1: Pollution Degree 2

　　Measurement: IEC 61010-2-033: CAT IV 600 V/CAT III 750 V

　　Memory

　　Internal memory can store 20 data sets (screen waveform and setup)

　　Micro SD card slot with optional SD card (maximum size of 32 GB)

　　Power

　　External: Via power adapter BC430

　　Input voltage: 10 to 21 V DC

　　Consumption: 5 W typical

　　Input connector: 5 mm jack

　　Internal: Via battery pack BP290

　　Battery power: Rechargeable Li-Ion 10.8 V

　　Operating time: 7 hours with 50 % backlight brightness

　　Charging time: 4 hours with test tool off, 7 hours with test tool on

　　Allowable ambient temperature: 32 to 104°F (0 to 40°C) during charging

　　Dimensions

　　10.2 x 5.2 x 2.15" (259 x 132 x 55 mm)

　　Weight

　　3.2 lbs (1.4 kg) including battery pack